Preparing the door frames for glass panels

Each door will have a glass panel that sits in rabbets cut along the inside edges of the frame; the glass is held in place by strips of molding. Once the glue has cured, remove the clamps and cut the rabbets on a router table. Install a '/2-inch top-piloted straight bit in a router and mount the tool in a table. Adjust the bit height to the combined thickness of the glass and molding you will be using. Remove the fence and set a door frame on the table. Turn on the tool and press the inside edge of the frame against the bit near one corner, then rotate the stock clockwise to cut the rabbets along the rails and stiles (right). Keep the frame flat on the table as you feed it into the bit. Square the corners of the rabbets with a mallet and a wood chisel. Repeat the procedure for the other door.

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook

Post a comment