Milling the cockbeading

Make enough cockbeading from %-thick-stock to fit the rabbets cut in step 1, shaping it with molding cutters on a table saw. (Do not use narrow stock; instead, cut pieces that are at least 4 inches wide and then rip the cockbeading from them.) Install an auxiliary fence and raise the molding head into the wood fence to notch it. Use a featherboard to secure the work-piece; screw it to a shim so the pressure will be applied against the middle of the stock. To adjust the cut, center an edge of the board over a cutter, then butt the fence against the face of the stock. Hold the workpiece flush against the fence and the table as you feed it into the cutters (left). Shape the opposite edge of the board the same way. Once all your stock has been milled, install a rip blade on the saw and cut the cockbeading from the boards, making it wide enough to protrude by lA inch from the rabbets in the safe.

lMood pad

Cockbeading

Clamping strip

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook


Post a comment