Making the Cabinet Doors

  1. The cabinet doors are constructed using the same procedures that you followed for the drawer fronts. The only difference is the size of the parts. To make one cabinet door, cut one 10-1/2-inch by 21-inch panel (R2) from 1/4-inch-thick plywood. Figure 6
  2. Cut two cabinet top/bottom frame pieces (S2) from 1x2 pine,
  3. Cut two cabinet top/bottom frame pieces (S2) from 1x2 pine,

FAPĀ£>

  1. Cut two cabinet side frame pieces (T2) from 1x2 pine, each 21 inches long.
  2. To construct the cabinet doors, follow steps 1 through 7 (substituting R2, S2, and T2 for R, S, and T) in the previous section, "Making the Drawer Fronts."
0 0

Post a comment