Attaching the Drawer Housing to the Arnioire

  1. Slide the completed drawer housing inside the lower section of the armoire. As shown in Figure 15, the exposed edges of the drawer housing should be flush with the exposed edges of the middle shelf (I), the front horizontal supports (F), and the bottom (H). The sides of the drawer housing should be positioned equidistant from the vertical supports (B), with 3-1/2 inches of open space on each side of the housing.
  2. With 2-1/4-inch-long screws, attach the drawer housing to the armoire, screwing through the top of the housing into the front horizontal support (F). Similarly, screw through the housing bottom into the bottom (H) and into the front horizontal support (F) below the bottom (H). Refer to Figure 15.
0 0

Post a comment