Adding the Side Trim

  1. Cut two horizontal side trim pieces (J) from 1 x 4 pine, each.24-3/4 inches long. Attach them to the two shorter ends of the sides (A), overlapping the exposed edges of the back (C), as shown in Figure 7. Use both glue and 1-1/4-inch-long screws, countersinking the screws.
  2. Cut two vertical side trim pieces (K) from 1x4 pine, each 65 inches long. Glue and screw them along each of the 6-foot edges of the sides (A), between the horizontal side trim pieces (J), as shown in Figure 7. They also cover the exposed edges of the back (C).
  3. Repeat steps 1 and 2 to add vertical and horizontal side trim pieces (J and K) to the remaining side (A) of the armoire.
0 0

Post a comment