Sides

1 Cut out the two sides and mark the positions of the frame assemblies on the inside of both.

2 Using a rebating plane, make rebates on the back inside edge of both sides, where the back panel will be fitted.

3 Hold the frames on to the sides in the marked positions and fix with screws.

FIG 11.4

Frame construction.

Back rail

Batten

Back rail

Batten

Top and base frame assembly

Middle frame assembly

14ton (368mm)

1313/iein (351mm)

2in (51mm)

FIG 11.5

Frame plans with dimensions.

14ton (368mm)-

0 0

Post a comment