Kitchen work trolley

DECREE OF DIFFICULTY: medium TIME TO MAKE: 55 hours

This versatile, mobile kitchen 'island' is ideal for vegetable preparation. It has a thick 'butcher's block' work surface, with plenty of space underneath for frequently used accessories, and a wide drawer. The entire trolley will glide smoothly around the kitchen on castors, which lock securely when it is in use for food preparation. There is also a sliding extension to the work surface which pulls out from the side of the trolley.

The top is made from small blocks of pine which are arranged so that the top surface is the end grain of the blocks. As well as being very attractive, this is an ideal surface for chopping vegetables as it is durable and will not blunt knives.

1 CUTTING LIST 1

CARCASS

Large blocks for top (56)

Pine

4 x 2 x 2in (102x51 x51mm)

Small blocks for top (14)

Pine

2 x 2 x 2in (51 x 51 x 51mm)

Legs A (4)

Pine

28x2 x2in (711 x 51 x51mm)

Deep back rail B (1)

Pre-jointed pine board

21H x 6^ x 3/4in (543 x 165 x 18mm)

Shallow side rail C (1)

Pre-jointed pine board

121/4 x 5'/4 x ^in (311 x 133 x 18mm)

Deep side rail D (1)

Pre-jointed pine board

121/4x6^x3/4in (311 x 165 x18mm)

Side top rail E (1)

Pine

12V4 x 2 x 3/4in (311 x 51 x18mm)

Back top rail F (1)

Pine

22\ x 2 x 3/4in (568x 51 x 18mm)

Front top rail G (1)

Pine

2lHx2x3/4in (543 x 51 x 18mm)

Sliding shelf support top rail H (1)

Pine

223/sx1 x 1 in (568 x 25 x 25mm)

Sliding shelf side supports I (2)

Pine

21H x 1 x 9/iein (543 x 25 x 14mm)

Long frame sides L (3)

Pine

233/s x 2 x 3/4in (594 x 51 x 18mm)

Short frame sides M (4)

Pine

10V4 x 2 x 3/4in (260 x 51 x 18mm)

Lower frame front N (1)

Pine

233/8 x 3 x 3/4in (594 x 76 x 18mm)

Drawer side support Q (2)

Pine

12'/4x 1V4 x 1 in (311 x 32 x 25mm)

Corner braces R (4)

Pine

4x4x3/4in (102 x 102 x 18mm)

Castors (4), two that lock

SLATTED SHELVES (FOR TWO SHELVES)

Long sides (4)

Pine

241/8x2x3/4in (612x51 x18mm)

Short sides (4)

Pine

12V4 x 2 x 3/4in (311 x 51 x18mm)

Slats (12)

Pine

247/8 x 1 h x Hin (632 x 38 x 9mm)

DRAWER

Front (1)

Pine

21V4 x 4,5/i6 x 3/4in (540 x 125 x 18mm)

Sides (2)

Plywood

14V2 x 3% x hm (368 x 92 x 12mm)

Back (1)

Plywood

21V4 x 3% x '/¿in (540 x 92 x 12mm)

Base (1)

Plywood

20V4 x 1314 x V4in (514 x 343 x 6mm)

Short base supports (2)

Pine

121/5 x h x (318 x 12 x 12mm)„

Long base supports (2)

Pine

201/4x h x hin (514 x 12 x 12mm)

ALSO REQUIRED:

Pine knob (1)

EXTENDING SHELF

Extending shelf (1)

Plywood

223/4 x 121/8x 1/2in (578 x 308 x 12mm)

Handle (1)

Pine

12 V8 x 1V, x 3/4in (308 x 32 x 18mm)

PAPER-TOWEL ROLL POLE

Post (1)

Pine

4V2 x 2^in (114 x 64mm) diameter

Post dowel (1)

Hardwood

V>i x 1^in (38 x 12mm) diameter

Pole (1)

Pine

10V2 x Hin (267 x 22mm) diameter

ALSO REQUIRED:

Pine ball (1)

1 '/2in (38mm) diameter

0 0

Post a comment