Assembly Finishing

1 Screw and glue the plinth to the carcass (see Fig 17.8).

2 Apply three coats of clear matt polyurethane varnish to match the desk and chair from Chapters 14 and 15.

FIG 17.7

Pinning the planks into the carcass to form the back.

FIG 17.7

Pinning the planks into the carcass to form the back.

FIG 17.8

Securing the plinth to the carcass with screws.

FIG 17.8

Securing the plinth to the carcass with screws.

0 0

Post a comment