Middle Frame Joinery

Attach the legs to the frame». Dry

W5 assemble the legs to the frames. Clamp them in place temporarily; do not screw them in place just yet. Square up the assembly, adjusting clamps as needed.

When the legs are square to the frames, remove the right long leg, and insert one long bottom rail and two end rails in their respective holes in both legs. Clamp the leg back in place. Repeat, removing the left short leg. When all the rails are in place — except for middle short rails and middle long rails — attach the legs to the frames with screws.

Note: Don't try to install die short middle rails and the long middle rails at this time. Wait until after you've nailed the slats in place.


Was this article helpful?

0 0

Post a comment