Attaching the chains

Install a screw eye in each of the seat back stiles 2 inches above the arm. Then mark the point on each arm directly over the front eye bolt and drill a hole to accommodate a l3/4-inch-diameter brass bushing. Insert the bushing and fasten it in place. Attach a length of chain with an opening link to each of the eye bolts in the seat rails (left). Thread the chain from the front eye bolts through the bushings; the chain from the rear eye bolts passes through the screw eyes in the back stiles. Join the chains on each side of the chair in pairs with opening chain links, giving you two points from which the chair can be hung.

Was this article helpful?

0 0

Post a comment