Certain basic machines are indispensable to every workshop even where hand work predominates. These are circular table saw; radial arm-saw; band-saw; planers; spindle moulder! shaper; mortiser; horizontal borer; overhead table router; drill-press; bench-grinder; sanders and lathes. If much veneer-work is done then either a screw-operated or vacuum-bag veneerpress will need a high priority, while production shops would place the dovetailing-machine and belt sander high on the list. Where it is intended to install only the most basic machines then obviously the table saw, planer and band-saw will take pride of place.
Was this article helpful?
Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.