Info

five long strips to each stretcher, building them up to form the crossover. The curved rail in 217:7 can also be bent or laminated, with the back stretcher tenoned in between the back legs and the curved stretcher into the back of the front legs. A small flat is worked on the curved stretcher (217:18) which is glued and screwed from the back. As the two sets of tenons enter from opposing directions, a trial assembly of the complete stand should be made in the dry state to determine the sequence.

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment