Frameless mirrors

Frameless mirrors with all edges polished are supported by a sturdy plywood back, and held in position with chrome-plated clips as inset. Figures 452:2, 3 are bevel shaped all round, while 452:4 is mounted on a veneered board and held by special fixing screws with heads tapped for chrome-plated domes (452:5). The screws should be an easy fit in the glass holes, and must not be screwed down tight; moreover if there is the slightest suggestion of bumpiness in the ground, rubber washers (W) should be used to isolate the glass, which could crack if any local strain is imposed.

Was this article helpful?

0 0
A Newbies Guide To Wood Working

A Newbies Guide To Wood Working

Wonder No Longer About Things Like Designs, Tools And Safety. These Problems Among Others Will Be Covered In This E-Book. You Will Be Creating Great Wooden Works Of Art In Very Little Time At All! For The Beginning Woodworker, The Construction of Handcrafted Wood Creations Can Be a Daunting And Overwhelming Experience. Well, Not Anymore!

Get My Free Ebook


Post a comment