Firstangle projection

Where a horizontal plane intersects a vertical plane (VP) dihedral angles are formed, of which both the first and third angles are used in orthographic projection. Where the first dihedral angle is used (332:1) the object is placed between the observer and the vertical plane (332:2), thus the front elevation is seen first (the arrow points the direction), the side elevation is projected from it by folding back the side vertical plane on the vertical trace (VT), and placing it alongside the front elevation. The horizontal plane is then folded down on the horizontal trace (HT) XY, known as the XY line, and therefore appears below the front elevation.

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook

Post a comment