Fall flap locks

Fall flaps which are inset, i.e. closing within the carcass framing, can be secured with standard till or drawer locks, but lay-on or onset flaps closing over the carcass framing require either purpose-made locks, link plate locks or special flap locks of which the type shown in 267 is a typical example. This lock can be used with striking plate 267:1, 2A for both inset or lay-on flaps, and with threaded bush and collared pin

(267:3B) for lay-on flaps only. Figure 267:4 is another variety for inset flaps in which the bolt shoots up into a standard striking plate.

The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment