Canted fronts

Slight cants (241:6) can be worked in the solid, but if steep then the whole front must be canted (241:7), and the dovetails laid out on lines drawn parallel to the long edges of the drawer sides. Laying out the pins square to the canted front as in 241:8 would result in short grain at the points (x,X).

241 Drawer details (3)
242 Cock beads to drawer front
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment