Cabriole leg framings

Figure 215:4 shows a bottom rail tenoned into the upper post of a cabriole leg with applied wing to the leg, and 215:5 a shaped rail in an independent stand arrangement made up of

A

separate elements (A) to save wood. Either a plinth mould (215:5) screwed to the underside of the carcass or a cap moulding (A) is fitted, the latter forming a locating rebate/rabbet for the loose stand.

Was this article helpful?

0 0
The Complete Guide To Wood Finishing

The Complete Guide To Wood Finishing

Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible. In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before. You will learn about every step in the wood finishing process from a professional wood finisher with years of experience.

Get My Free Ebook


Post a comment