Now for the rest of the moldings

ICut the remaining molding pieces (J, K, L, M, N, O) to size plus 2" in shelving showcase b bevel-ripping cove molding length. To form the bullnose on the front edge of J and K, rout a pair of !/s" round-overs along the front edge. (See Drawing 4a.)

2 With the back edges flush, glue part L between parts J. Repeat with the side pieces K and M. Miter-cut the ends, and then glue and clamp the trim strips J/L and K/M to the cabinet.

3 Miter-cut the bullnosed strips N and O to length for both the cabinet top and bottom. Glue them into the previously cut dadoes in the cabinet.

4 Cut the base molding pieces (P, Q) to size plus 2" in length. Rout a V2 cove along the top outside edge of each.

5Using Drawing 3 for reference, miter-cut the pieces to length, mark the radii on the front piece, and cut it to shape. Drill mounting holes through the cabinet and into the back side of the base molding pieces. Glue and screw the pieces to the cabinet bottom.

Woodworking Tools and Installation Tips

Woodworking Tools and Installation Tips

There are a lot of things that either needs to be repaired, or put together when youre a homeowner. If youre a new homeowner, and have just gotten out of apartment style living, you might want to take this list with you to the hardware store. From remolding jobs to putting together furniture you can use these 5 power tools to get your stuff together. Dont forget too that youll need a few extra tools for other jobs around the house.

Get My Free Ebook

Post a comment