Directions For Making The Chair

The joints of the chair from the peat down are ail mortised and tenoned. The back can be reproduced by drawing 2 squares on a sheet of heavy paper and checking off the intersections on the drawing. After drawing the outline, cut it out and use it for a pattern. The back legs are extended above the seat, making a total length of not less than 36. First one side is band-sawed and then the other. Use th e waste pieces to form a cradle when making shape of the rim. The Hepplewhite Chair is Marked...

Sheraton Breakfast Table

THIS table is one of very pleasing lines and is not a difficult project to make. While it is termed a breakfast table, there is no reason why it cannot find an appropriate place in any room. The characteristics of a table of this kind consist of the drop leaves, which are held up by wooden brackets that swing under the top. It is made oi mahogany and has some inlay or. the outer edges of the legs and border strips of inlay can be found along the lower edges of the rails. Plane up the stock for...