Elipe For Thi Pembroke Table

Before you can draw the elipse for the table top, you should first build the base. Measure the maximum width and length of the base, from outside to outside of the legs. This should be 16V x 22V.'. Draw this rectangle on a piece of poster board or plywood, see Fig. 2. Before you can draw the elipse, you must determine two things The maximum width of the top. and the maximum width of each leaf. We decided the top should extend W from each side, so the maximum width is 18V . Then we set the...

Elipsi For The Butlers Table

Drawing the elipse for the Butler's Table involves a different set of problems. What you want to get is an elipse drawn around the frame so, 1 it touches each of the four corners, and 2 so the maximum distance from the edge of the frame to the elipse is equal on all four sides. The first step is to draw the outline of the web frame tray ami then draw an elipse on the ituiidr of the frame so it touches the center point of each side. But what you want is an elipse scribed on the outside so it...