Shaping the arches

To complete the routing jig, prepare a guide piece with a notch to fit the arch blanks you cut in step 1, and fasten it to the template, centering the notch over the arch outline. Screw two toggle clamps to the guide piece and secure the first blank to the jig. Next, install a top-piloted flush-cutting bit in your router, mount the tool In a table, and adjust the bit height so the pilot bearing will ride against the template. To complete the setup, clamp a picket-shaped pivot bar to the table in line with, and almost touching, the bit. To trim the arches to final shape, hold the jig with both hands and press the template at one end of the arch pattern against the pivot bar. Then pivot the jig and blank into the bit. Once the template contacts the pilot bearing, shape the arch by guiding the cutter along It, starting with the bearing pressed against one end of the pattern, riding it along the template, and stopping when it contacts the opposite end (above).

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook


Post a comment