Outlining the tapers

For a bed of the dimensions shown on page 50, mark a line for the start of the taper all around the blank 20 inches from the bottom end. Then outline the octagonal taper on the center of the top end. Start by centering a 114-inch square on the end with sides parallel to the stock's side. Extend the sides of the square to the edges of the stock, then draw vertical and horizontal lines through the center, each bisecting the square's sides. Next use a compass to draw a circle from the center of the square that passes through each of its four corners. Then, with a pencil and ruler, draw a second square whose corners meet where the circle and center lines intersect (inset). The octagonal shape will be cut by first tapering the stock to the dimensions of the first square you drew, then by planing the corners of that square down to the remaining sides of the second square. Mark the first cuts by using a pencil and long straightedge to extend the taper lines from the end to the start line (above).

Outfeed table

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook

Post a comment