Making the molding and attaching the frame

Fixed to the underside of the bookcase top and flush against the carcase, the crown molding consists of three layers (inset). Cut the molding frame pieces to length, mltering both ends of the front piece and the front end of each side piece. Create the built-up molding on the router table as you did the base molding (page 129), using two different ogee bits for the narrow and wider pieces. Cut the molding to length, mltering the pieces as you did the frame. Start by installing the molding frame. For the side pieces, drill an elongated hole through each board near the straight end; to allow for wood movement, spread glue on only the first 2 inches of the top face at the mitered end. Now, set the bookcase top-down on a work surface and position one side piece on the underside of the top. Install a bar clamp to secure the mitered end and drive a wood screw through the elongated hole and into the top to fix the back end (left). Repeat for the other side, then install the front piece spreading glue along its entire length.

__ Molding frame

Built-up molding

__ Molding frame

Built-up molding

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook


Post a comment