Installing the drawer divider and loper housings

Cut the loper housings to size (page 108), using a sliding dovetail to add a piece to the front end of each one to hide the end grain. Then rout the 'A-inch-wide slots in the housings for the loper dowels. Make the L-shaped drawer divider and attach it to the cross rail of the middle dust frame with a biscuit joint (above, left). Cut another biscuit slot into the muntin and a matching slot in the top dust frame above it.

Next, rout grooves into the underside of the top panel and top face of the uppermost dust frame to accommodate the loper housings. Spread glue in the slots and grooves, then fit the dust frames together, using clamps to secure the drawer divider, the loper housings, and the frames in place. Protect the stock with wood pads and use a try square to check that the assembly is square (above, right).

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook

Post a comment