Dadoing the carcase sides

Use a router to cut 3/s-inch-wide, 3/ie-inch-deep rabbets around the back edge of the carcase to accommodate the back. Then prepare the sides for the dust frames. The ends of the frames fit into stopped dadoes in the sides. To cut the dadoes, install a %-inch straight bit in your router, set the cutting depth to Vi inch, and secure one of the side panels inside-face up to a work surface. Refer to the anatomy illustration on page 106 and the drawer measurements on page 108 to outline the dadoes on the stock, then clamp an edge guide to the panel so the bit will be centered on the first marked line. Also clamp a stop block along the front edge of the panel so the dado will stop 2 inches short of the edge. For each dust frame, rout a stopped dado from the back edge of the side panel (above), stopping when the router base plate contacts the stop block. Square the ends of the dado with a chisel.

How To Sell Furniture

How To Sell Furniture

Types Of Furniture To Sell. There are many types of products you can sell. You just need to determine who your target market is and what specific item they want. Or you could sell a couple different ones in a package deal.

Get My Free Ebook


Post a comment