upright dimensions given are for 14' high mattress sembling the pieces for the basic frame, the edges of the top rail (B), the middle rail (C) and the uprights (A) are chamfered. I did this on the router table, setting the height of a 45° chamfer bit to cut a Vi"-wide chamfer.

All of the edges and corners of these four pieces are chamfered . . . with three exceptions. The inside top comer of the uprights is not chamfered, see Fig. 6. And both the top and bottom corners of the middle rail are not chamfered, see Fig. 5,

Was this article helpful?

0 0

Post a comment